Product Features
KF-S 020 Thermolock interior coating is a highly resisting coating product which is not required another coating in the interior walls as well as it isolates heat, sound and fire. Preferably it is produced as white or grey colored. Along with its longevity, it does not become deformed in the occasion of moisture or possible leakage thanks to its waterproof structure, even though it does not include water isolation because of the fact that a direct exposure to water is not possible on interior walls. It is an isolation material consisting of practically applicable structure, A1 class breathability and noninflammability.
| Packing Type | 20 kg. Kraft Pouch |
| Appearance | White Granular Powder |
| Dry Density | 380 ± %10 (kg/m3) |
| Thermal Conductivity | 0.064 (W/mk) T1 |
| Acoustic Insulation | 25 Db |
| Compressive Strength | 1.67 (N/mm2) CSII |
| Bond Strength | 0,368 (N/mm2) |
| Fire Endurance | (1000C°)A1 |
| Make-ready time for painting | 48 Hours |
| Shelf Life | 16 Months |
| Heat Range | +5C° +35C° |
| Application Method | Machine or Steel Trowel |
| Consumption | 1 cm/m2 appr 4,5 – 5 kg. |
To take into account
KF-S 020, Thermolock should be used in its totality as 1 bag because of its content.
The product should be mixed with the help of a mixer or concrete mixer (for minimum 6 minutes).Thermolock KF-S 020 interior coating should not be mixed with more water than the stated amount (15lt).
More water should not be added if waiting period of any grout prepared with Thermolock KF-S 020 takes a longer time in the boat for any reason and the grout loses its consistency. It is only necessary to mix the grout with a low speed mixer in order to renew the consistency. If Thermolock KF-S 011 applies over painted surfaces, mineral plaster and other coatings, purge the surface approximately at a rate of 70% by using paint remover chemicals, surface abrasion or other similar methods.
If Thermolock KF-S 020 applies over painted surfaces, mineral plaster and other coatings, purge the surface approximately at a rate of 70% by using paint remover chemicals, surface abrasion or other similar methods.
Usage
The usage of Thermolock KF-S 020 interior coating on the interior walls especially over heat loss inhibits other construction elements (wall, column, girder etc.) from affecting the ambient temperature by absorbing the heat. As a result of this effect, not only the energy consumption is highly economized but also heating up in winter and cooling in summer indoors are provided more quickly only by heating and cooling the indoor air. 48 hours after the application, optional satining and dyeing can be applied. It is possible to get wide range of decorative surfaces. (It is recommended to use water based paints in order not to lose the breathability feature).